https://www.neptunboot.co.za/
The letters and numbers on a safety boot tell you what it has been tested to do. Once you know how to read them, it becomes easier to choose safety footwear for the hazards in your workplace.
EN ISO 20345 is a recognised standard for safety footwear. Footwear certified to it must have a protective toe cap tested against an impact of 200 joules and a compression force of 15 kilonewtons. The standard also sets basic requirements for the footwear’s construction and performance. That is the starting point.
The category code, such as S1, S2 or S3, tells you which further protections the footwear provides.
SB meets the basic safety footwear requirements, including the protective toe cap.
S1 adds a closed heel, antistatic properties and energy absorption in the heel.
S2 adds resistance to water entering through the upper.
S3 adds underfoot penetration protection and a cleated sole to the S2 requirements.
These categories build on one another, but S3 does not mean the safety boot is completely waterproof. It means the upper meets a water resistance requirement. A category code also does not cover every possible workplace hazard.
Some safety boots carry additional codes alongside their category. These identify specific properties that have been tested.
For example:
FO relates to the outsole’s resistance to fuel oil.
SR identifies an additional slip resistance test under the newer edition of the standard.
WR relates to the water resistance of the whole safety boot rather than just the upper.
Only rely on an additional property if it appears in the approved marking for that particular safety boot. The codes and test requirements have changed between editions of the standard, so check the full marking and standard year when comparing products.
Let’s use Neptun’s SafeLite Black Ankle Safety Boot as an example.
Neptun’s SafeLite Black Ankle Safety Boot, product code AABS3, is described as an S3 safety boot. It has a polycarbonate protective toe cap and a ballistic textile midsole for underfoot penetration protection. Its 2 mm split leather upper, dual density direct injected polyurethane sole and reflective tape complete the design. It is available in UK sizes 3 to 13.
Here is how to read those names and codes:
SafeLite is the Neptun footwear range.
AABS3 is Neptun’s product code for this model.
S3 is its stated safety category.
The safety boot’s complete approved marking gives its precise protection claims.
A product code is not a substitute for a certification marking. Check the specific model and its documentation against your workplace requirements.
In South Africa, safety footwear is subject to a compulsory specification known as VC 9002, overseen by the National Regulator for Compulsory Specifications, or NRCS. The NRCS approval process concerns a type of safety footwear supplied in the South African market.
Put simply, EN ISO 20345 sets out how safety footwear is tested. Codes such as S3 describe the protection claimed for a particular safety boot. NRCS approval addresses the applicable regulatory requirements for supplying that type of footwear in South Africa.
To choose the right safety boot, start with the hazards of the job. Then read the safety boot’s complete safety marking and check the approval for the exact SafeLite model being supplied.
See our full SafeLite safety boot range here.

DONATE
GRANULATE
REFABRICATE